1.800.421.5830 TO ORDER93 TILE TILESTONELAPIDARYMASONRYCONCRETEMIXERSCORINGPOLICYTROUBLESHOOTING FLOOR PREP MK-APC/H Air Powered Chop Saw The MK- APC/H Handheld Air Powered Chop Saw is portable with a non-slip belt designed to improve power transfer. The MK-APC/H has the benefits of an air motor with no performance loss when compared to conventionally powered competitors. This saw can be used in the same way as a conventional gas high speed saw, but without having to worry about exhaust fumes. Cuts up to 5-inches deep. The weight of the saw is precisely balanced for the operator in order to eliminate rocking of saw during cutting. This saw also has a built "at rest" stand. The adjustable guard will swing 90 degrees allowing a range cutting angles. This saw is ideal for concrete pile cutting, demolition and pipe cutting at below grade. An easy to read oiler is included for quick check of fluid levels by the operator. Built-in water hose adaptor allows for either wet or dry cutting. Air Requirement85 cfm of air at 80 psi Blade Capacity14" Depth of Cut5" L x W x H (inches) L x W x H (mm) 37" x 9.5" x 19" 940 x 241 x 483 Weight24 lbs (11 kg) Part #167989 MK-APC/W Air Powered Walk Behind Concrete Saw The MK-APC/W Air Powered Walk Behind Concrete Saw has a 9.5 hp pneumatic motor with gear box drive. The rugged tubular steel design provides a rigid base from which the pneumatic motor is fixed to the blade guard. Designed for tough cutting jobs, this saw is ideal for joint widening, indoor floor sawing, trenching and patch work. The MK-APC/W will cut up to 7 inches deep with no gas or engine fumes. Air Requirement85 cfm of air at 80 psi Blade Capacity20" Depth of Cut7" L x W x H (inches) L x W x H (mm) 42" x 19" x 41" 1,067 x 483 x 1,041 Weight108 lbs (49 kg) Part #167990 Blade not included Blade not included
If you would like to view publication without flash plugin, please click on link below
